1 Device: PLC control.

2. Operation: hydraulic system transmission, (1 hydraulic main pump system can control 3 pouring machines), hydraulic main pump power of 11KW; equipped with water cooler system, system oil temperature detection, liquid level detection, negative oil pressure detection, and water inlet temperature detection of cooler.

3. Casting function: 1. Pour into, 2. Fixed, 3. oblique injection, 4. inclined parts, 5. inclined injection.

4. Adjustable casting speed: the tilt casting Angle from 0-85 degrees can be set at any Angle.

5. Angle: horizontal 0 degrees, tilt 85 degrees, two choices; upper module.

(When the mode is opened, the lower mode starts the top out synchronously, and brings the workpiece to the upper module again).

6. Mold cooling and heating.

7. Size of mold fixed seat: 800 * 400 * 60mm, (with 5 groove of pressing plate groove).

8. Maximum weight of the mold: 800kg.

9. Maximum mold stroke: 450mm.

10. Maximum spacing between both sides of the mold fixed plate: 730mm.

11. Minimum spacing between both sides of the mold fixing plate: 280m.

12. Die closing force: 6,300 k g.

13. Neutron (core pumping): there are four ways to work independently or in sequence or simultaneously, (the oil cylinder connecting the mold is supplied by the customer)

14. Curing time: Adjustable.

15. Casting process time can be displayed.

16. The mold temperature can be set at the upper and lower limits. When the mold temperature exceeds the upper and lower limits, the mold can not be closed for the next cycle action, or the optional action can not be controlled by the mold temperature.

17. There is a die-water cooling pipe device system

18. Net weight of the equipment: about 4,800 k g

19.. Machine specification: 2899mm * 1805mm * 2150mm (use space).