Technical parameter:

1. Device: PLC control.

2. Operation: hydraulic system transmission, water distribution cooling test cooling system (1 hydraulic main pump system can control the power of 3 machines and hydraulic main pump 11KW; equipped with water cooler system, system oil temperature detection, liquid level detection, return oil and negative pressure detection, cooler water inlet temperature detection.

3. Mounting function: tilt casting, tilt positioning pouring, horizontal pouring.

4. Adjustable casting speed: the inclined casting Angle is 0-90 degrees adjustable.

5. Take le: horizontal 0 degrees, tilt 90 degrees, two choices; upper module.

(When the mode is opened, the lower mode starts the top out synchronously, and brings the workpiece to the upper mode again).

6. Mold cooling and heating.

6. Die fixed plate size: 700 * 300 * 70mm.

7. Maximum mold weight: 800kg (at 0-85 degrees).

8. Maximum mold stroke: 450mm.

9. Maximum spacing between both sides of the mold fixing plate: 700mm.

10. Minimum spacing between both sides of the mold fixing plate: 250m.

11. Die closing pressure: 5,000 k g

12. Neutron (core pumping): a solenoid valve controls two ways and works at the same time, (the oil cylinder connected to the mold is supplied by the customer).

13. Curing time: Adjustable.

14. Casting process time can be displayed.

15. The mold temperature can be set at the upper and lower limits. When the mold temperature exceeds the upper and lower limits, the mold can not be closed for the next cycle action, or the action can not be controlled by the mold temperature.

16. There is a die-water cooling pipe device system.

17. Net weight of the equipment: 3,700 k g.

18. Machine specification: 2953 * 1655 * 1962MM (equipment height is 2910mm when the workbench is rotated to 90 degrees)